PEI
(Porcelain Enamel Institute) ratings help you determine the hardness and
durability of tile. This is crucial because not all tile can be used
in all areas. PEI ratings act as a kind of shortcut to figure out
where the tile can be installed. Tile that experiences much foot traffic
should be harder and denser than than that receives no foot traffic. Tile
installed on a wall receives no foot traffic and, in fact, almost no wear of
any kind.
From a technical perspective PEI ratings are actually determined by a
measurement of Abrasion Resistance (EN154) measured on a machine like the one
above which counts the number of revolutions under a standard abrasive
load. When the tile shows damage the revolutions are counted, (from 150 to 1500+) this
gives the PEI rating.
The method was developed on the
basis of the claim that the degree of deterioration of a floor should
not determined by the reduction in its thickness, but the visible
difference in appearance between the worn surface and the unworn surface, assessed
at a defined distance under standard conditions of lighting. It is important to
stress that, for the same degree of abrasion, wear is invariably more visible
on dark surfaces. For this reason, the PEI value is shown in tile catalogues as
the requirement for the individual article, rather than for the series as a
whole which may have lighter and darker tiles.
PEI 1: Up to 154 revolutions
No foot traffic. Wall use only in residential and commercial applications. For use on very light-wear areas, using soft footwear.
PEI 2: 300, 450, 600 revolutions
Light traffic. Very light-wear, mainly bathrooms and areas using soft footwear. Wall use and bathroom floor applications.
PEI 3: 750, 900, 1200, 1500 revolutions
Light to moderate traffic. Average domestic homes. Countertops, walls, and floors for normal foot traffic.
PEI 4: 1500+ revolutions
Moderate to heavy traffic. All residential applications as well as medium commercial and light institutional.
PEI 5: 12000 revolutions
Heavy to extra heavy traffic. All residential and heavy commercial and institutional foot traffic, stores, entrance halls, shops & hotel floors.
From this scale you can see the numbers of revolutions required in the testing method to abrade the tile. But some tiles, classed as PEI 4, could possibly only withstand abrasion up to 2000 revolutions while others could withstand abrasion far in excess of 1500 in fact as much as 96 000. This is why PEI 5 is being introduced.
The new ISO product standards (Project ISO TC/189) envisage the introduction of a further class of resistance, class PEI 5, to which tiles meeting the following conditions at 12 000 rpm will be assigned:
1. Alterations must not be visible at a standard distance.
2. The surface subjected to abrasion must pass a cleaning test with the staining agents chromium green in light oil, iodine in alcohol solution, and olive oil.
This new class, therefore, also takes into account the effects of abrasion on susceptibility to soiling. The introduction of class PEI 5 fulfills the need to highlight more clearly, in relation to performance, the superior characteristics of ceramic glazes for technical applications developed in recent years.
